GERMANIUM STEREO EQUALIZER MODEL 1 GEN.1

FOR MOVING MAGNET CARTRIDGE.

Telemann Equalizer Model 1 is an advanced version of the vinyl corrector with improved circuitry of the 70s and extended functionality

How to order?

Description

Designed for use with a MM cartridge. The device is implemented entirely on germanium semiconductors, including the corrector itself, the power stabilizer and the rectifier. To reduce the noise level, a rare solution was applied – four low-noise high frequency transistors connected in parallel were used at the input.   To effectively and accurately compensate for the spread of cartridge parameters, a variable capacitor with an air dielectric is included at the input, which allows the corrector to be used with almost any MM cartridge. The input capacity is smoothly controlled by a regulator directly on the front panel.

Specifications

MM

Input Impedance
  • R

    47kOhms

  • C

    40…400pF

  • Gain @1kHz

    40dB

  • Input nominal sensitivity

    5mV

  • SNRo @A weighted

    66 dB

Input overload
  • 20Hz

    12dB

  • 1kHz

    32dB

  • 20kHz

    44dB

  • THD @20Hz…20kHz

    <0.2%

  • RIAA response accuracy

    ±0.5dB

Line Out

  • Output Impedance

    600 Ohms

  • Maximum Output Level

    6V

General Specifications

  • AC Supply Internal

    117/230VAC

  • W x H x D

    216 x 88 x 178

  • Maximum Output Level

    6V